Systems with linear guide

Free-standing – linear guides

We are one of the few companies that has all types of guiding systems available. Depending on the circumstances of the building and the demands on how your works of art need to be handled, you may select between ceiling- or floor-running, free-standing or ceiling-mounted systems equipped with vibration- and shock-free linear guides or double-axle rollers with steel or plastic coatings.

Explanation pictograms

The linear guides are actually precision guide runners. Vibration- and shock-free linear-motion bearings run on hardened high-precision steel shafts. The size of the linear guides employed depends on the size of the sliding panels and the desired bearing capacities. The sliding panels may be equipped with several linear-motion bearings depending on the required bearing capacities. Our linear-guided art-storage systems fulfil the highest of demands.

 

linear-L25.jpg

Linear guide L-25

linear-L30.jpg

Linear guide L-30

linear-L40.jpg

Linear guide L-40


Guides and stoppers are small but they're important to safely moving sliding panels in and out. The doubly sprung floor rollers that run with their loads ensure that the sliding panels are precisely guided.
 

bodenrollen-TypA.jpg

Floor rolle Type A, 2 springs

bodenrollen-TypB.jpg

Floor roller Type B, 1 spring

Schiebewand-feststeller.jpg

Sliding panel immobiliser

bodenfuehrung-TypA.jpg

Bottom guidance Type A

bodenfuehrung-TypC.jpg

Bottom guidance Type C


gummipuffer1.jpg

Rubber damper

federstopper1.jpg

Spring damper

gummipuffer2.jpg

Rubber damper

gasdruckdaempfer.jpg

Gas spring


Type GEM-1 / GEM-2

The grid mats are not riveted on but welded over the full area on to the element frame. This achieves the greatest possible stability in the sliding panels. A high-quality powder coating also protects the art storage system for years to come. The grid elements are available with double- or single-sided grid coverings.

Ecke-einfach-vollmaterial.png

GEM-2

Ecke-doppel-vollmaterial.png

GEM-1 (2 pc.)


2 and 3 sided system

The art storage system may also be planned as a three-sectioned system. This would permit storage capacities to be increased by 33% for the same space whereby the additional cost would be proportionately lower.

 

2-seitige-Anlage.png

2 sided system

3-seitige-Anlage.png

3 sided system


We manufacture our standardised grid elements using highly modern production systems. The sliding panels are assembled from grid elements in three different widths whereby each element is available in four heights. Sliding panels may, of course, be made to heights specified by customers.

tabelle-standardgroessen.png

Sliding panels‘ bearing capacity

tragkrafttabelle.png